How to Clean Up Your Bubblemaps With Token Locking
The fastest way to improve your Bubblemaps is to lock tokens into Program Derived Addresses (PDAs). When tokens are locked into a PDA on-chain, they are removed from your wallet's visible balance and appear as a separate isolated cluster on Bubblemaps — reducing the appearance of concentration and proving to investors that those tokens are secured, not sitting ready to dump.
This guide explains exactly how Bubblemaps reads your token distribution, why PDAs create clean separation, and how to lock tokens correctly without triggering red flags in the process.
Lock Your Tokens on StakePoint
Creates clean PDA clusters · Publicly verifiable · Non-custodial
What Bubblemaps Actually Shows
Bubblemaps is a token distribution visualiser that reads all on-chain wallet holdings for a given token and maps them as bubbles. The size of each bubble represents the percentage of supply held. Lines between bubbles indicate wallets that have transacted with each other.
Investors and communities use Bubblemaps to answer two questions:
Is supply concentrated in a small number of wallets?
Are those wallets connected to each other or to the dev wallet?
A token where 40% of supply sits across 3 connected wallets looks like a rug waiting to happen — regardless of what the team says publicly. Bubblemaps makes this visible in seconds.
Why Concentrated Wallets Kill Projects
A red Bubblemaps is one of the most common reasons communities walk away from a launch. It implies:
- The dev or team can dump at any time
- Supply is not genuinely distributed
- The project is centralised and trust cannot be verified
The traditional response is to manually send tokens to new wallets to create the appearance of distribution. This approach backfires. Bubblemaps draws connection lines between wallets that have transacted — so manually spreading tokens from a single source wallet creates a visible spider web pattern that is immediately recognisable as artificial distribution. It often looks worse than the original concentration.
Locking into PDAs solves this differently.
How PDA Locking Changes Your Bubblemaps
When you lock tokens on StakePoint, they are transferred into a Program Derived Address — a smart contract account with no private key. No person controls a PDA. It is owned entirely by the program.
From Bubblemaps' perspective, this has three effects:
1. Tokens leave your wallet. Your dev or team wallet's bubble shrinks immediately. If you held 20% and lock 15%, your bubble drops from 20% to 5%.
2. The PDA appears as a separate cluster. The locked tokens appear as a new bubble on Bubblemaps under the program address — clearly distinct from any personal wallet. There is no connection line between your wallet and the PDA that suggests you can access those tokens.
3. The lock is publicly verifiable. Anyone can confirm at stakepoint.app/locks that those tokens are locked, for how long, and by which wallet — making the Bubblemaps improvement credible rather than suspicious.
The 3% Rule — Lock in Small Tranches
This is the most important practical advice for using locks to improve Bubblemaps.
Do not lock more than 3% of supply in a single lock if your total supply is large.
Locking a large amount in one transaction creates one large PDA bubble. While that bubble is clearly separated from your wallet, a single massive cluster still looks unusual and can itself attract scrutiny — particularly if it is larger than most holder wallets.
Instead, create multiple smaller locks:
- Each lock creates its own separate PDA address
- Each PDA appears as a distinct bubble on Bubblemaps
- Multiple small clusters distributed across different PDA addresses mimics natural vesting and distribution patterns
- It also signals ongoing commitment — you locked in multiple tranches over time rather than one rushed single transaction
Recommended approach by supply size
Supply under 1 billion tokens:
Lock in tranches of 2–3% of supply per lock. Create 5–10 separate locks if locking a significant portion.
Supply 1 billion to 10 billion tokens:
Lock in tranches of 1–2% per lock. The absolute token amounts are large — keep individual locks visually proportionate to holder wallets on Bubblemaps.
Supply above 10 billion tokens:
Lock in tranches of 0.5–1% per lock. At this scale even small percentage locks represent enormous token counts. Multiple smaller locks spread more naturally across the map.
There is no hard rule that works for every token. The goal is for each PDA cluster on Bubblemaps to appear roughly proportionate to mid-tier holder wallets — not so large that it dominates the map, not so small that it is invisible.
Create Multiple Locks on StakePoint
Each lock = separate PDA cluster on Bubblemaps
Step by Step — How to Lock Tokens to Improve Bubblemaps
Step 1: Check your current Bubblemaps
Go to bubblemaps.io and search your token mint address. Screenshot your current map. Note which wallets are large and connected. This is your baseline.
Step 2: Calculate your lock tranches
Decide the total percentage of supply you want to lock. Divide by 3% maximum per lock to determine how many locks you need.
Example: You want to lock 15% of supply. At 3% per lock, that is 5 separate locks.
Step 3: Go to StakePoint Locks
Visit stakepoint.app/locks and connect the wallet holding the tokens.
Step 4: Create your first lock
Click "Create Lock", select your token, enter the first tranche amount, set your duration, and confirm. The tokens leave your wallet immediately.
Step 5: Repeat for each tranche
Create each additional lock as a separate transaction. Each one creates a new PDA address and a new independent cluster on Bubblemaps.
You do not need to do all locks in one session. Locking over several days or weeks looks more natural than locking everything in a single block of transactions.
Step 6: Refresh Bubblemaps
After your locks are confirmed on-chain, refresh your Bubblemaps. You will see your main wallet bubble shrink and new isolated PDA clusters appear — each one clearly separate with no connection lines to your wallet.
Step 7: Share the proof
Post your updated Bubblemaps screenshot alongside your lock links at stakepoint.app/locks. This turns a previously red flag into active evidence of commitment.
What a Cleaned-Up Bubblemaps Looks Like
Before locking, a typical dev-heavy launch shows:
- One large bubble (dev wallet) at 25–40%
- Several connected mid-size bubbles (team or early wallets)
- A long tail of small holder wallets
- Connection lines between the large bubbles
After locking 15% in 5 tranches:
- Dev wallet bubble shrinks from 25% to 10%
- Five separate PDA bubbles appear at 3% each — isolated, unconnected, clearly program-controlled
- The map looks genuinely distributed
- The connection lines between large wallets are broken or reduced
The visual difference is significant. More importantly it is backed by on-chain proof — not just optics.
Locking Team and Investor Tokens
The same approach applies to team allocations and investor tokens.
If team wallets hold 10% each, locking those allocations into PDAs with 6–12 month durations removes them from the active supply shown on Bubblemaps and proves vesting is enforced on-chain rather than just promised.
Investors and KOLs increasingly require this before promoting a project. A locked team allocation on Bubblemaps combined with a verifiable lock link is the difference between a credible project and one that gets dismissed in 30 seconds.
Bubblemaps Improvement FAQ
Does locking tokens affect trading or the price?
No. Locking tokens removes them from your wallet but does not affect liquidity, trading volume, or price. The tokens sit in the PDA until the unlock date with no market impact.
Can I create locks from multiple different wallets?
Yes. If team tokens are spread across multiple wallets, each team member can create their own locks from their own wallet. Each appears as a separate PDA on Bubblemaps, further improving the distribution picture.
Will Bubblemaps update immediately after locking?
Bubblemaps updates periodically. In most cases your map will reflect the new distribution within a few minutes to an hour of the lock being confirmed on-chain.
Does this work for LP tokens as well?
Yes. Locking LP tokens removes them from your wallet and creates a separate PDA cluster on Bubblemaps in the same way. LP locking and token locking both improve your map.
Can I choose different durations for different tranches?
Yes. Each lock is independent. You can set 30 days for one tranche, 90 days for another, and 180 days for a third. Staggered durations mimic natural vesting schedules and look even more credible than uniform durations.
Is there a limit to how many locks I can create?
No. Create as many locks as your strategy requires. Each lock costs a small SOL fee (under $0.10) and generates its own publicly verifiable record at stakepoint.app/locks.
Start Locking on StakePoint
Multiple locks · Each creates a separate PDA cluster
The Full Trust Stack
Improving Bubblemaps through locking is one layer of a complete trust picture:
Layer 1: LP Locked → Liquidity cannot be removed → stakepoint.app/locks
Layer 2: Team Tokens Locked in PDAs → Bubblemaps improves → stakepoint.app/locks
Layer 3: Token Safety Score → Green flags on aggregators → stakepoint.app/tools/token-safety
Layer 4: Staking Pool for Holders → Holders earn rewards for staying → stakepoint.app/for-projects
A project that completes all four layers has removed virtually every standard objection a community uses to dismiss a launch.
Related Guides
**→ How to Lock Team Tokens on Solana
**→ How to Lock LP Tokens on Solana
**→ Best Solana Token Locker 2026
**→ How to Lock Pump.fun Tokens Before and After Graduation
**→ Complete Solana Token Locking Guide
*Lock your tokens at stakepoint.app/locks. Each lock creates a separate on-chain PDA — reducing Bubblemaps concentration and proving commitment to your community.*